Polymethoxylated flavonoids in citrus fruits: absorption, metabolism, and anticancer mechanisms against breast cancer.

Polymethoxylated flavonoids (PMFs) are a subclass of flavonoids found in citrus fruits that have shown multifunctional biological activities and potential anticancer effects against breast cancer. We studied the absorption, metabolism, species source, toxicity, anti-cancer mechanisms, and molecular targets of PMFs to better utilize their anticancer activity against breast cancer. We discuss the absorption and metabolism of PMFs in the body, including the methylation, demethylation, and hydroxylation processes. The anticancer mechanisms of PMFs against breast cancer were also reviewed, including the estrogen activity, cytochrome P-450 enzyme system, and arylhydrocarbon receptor (AhR) inhibition, along with various molecular targets and potential anticancer effects. Although PMFs may be advantageous in the prevention and treatment for breast cancer, there is a lack of clinical evidence and data to support their efficacy. Despite their promise, there is still a long way to go before PMFs can be applied clinically.

The role of ATP binding cassette (ABC) transporters in breast cancer: Evaluating prognosis, predicting immunity, and guiding treatment.

Breast cancer is currently the most prevalent form of cancer worldwide. Nevertheless, there remains limited clarity regarding our understanding of the tumor microenvironment and metabolic characteristics associated with it. ATP-binding cassette (ABC) transporters are the predominant transmembrane transporters found in organisms. Therefore, it is essential to investigate the role of ABC transporters in breast cancer. Transcriptome data from breast cancer patients were downloaded from the TCGA database. ABC transporter-related genes were obtained from the Genecards database. By LASSO regression, ABC-associated prognostic signature was constructed in breast cancer. Subsequently, immune microenvironment analysis was performed. Finally, cell experiments were performed to verify the function of ABCB7 in the breast cancer cell lines MDA-MB-231 and MCF-7. Using the ABC transporter-associated signature, we calculated a risk score for each breast cancer patient. Patients with breast cancer were subsequently categorized into high-risk and low-risk groups, utilizing the median risk score as the threshold. Notably, patients in the high-risk group exhibited significantly worse prognosis (P<0.05). Additionally, differences were observed in terms of immune cell infiltration levels, immune correlations, and gene expression of immune checkpoints between the two groups. Functional experiments conducted on breast cancer cell lines MDA-MB-231 and MCF-7 demonstrated that ABCB7 knockdown significantly diminished cell activity, proliferation, invasion, and migration. These findings emphasize the significance of understanding ABC transporter-mediated metabolic and transport characteristics in breast cancer, offering promising directions for further research and potential therapeutic interventions.

Electrospun chitosan-based nanofibers loading tea tree oil for fresh salmon fillet shelf-life extension.

Bioactive packaging can improve the shelf-life of food products and enhance consumer health. It can also alleviate environmental stress on the planet by reducing food waste. Here, the electrospinning of tea tree oil-loaded 2-hydroxypropyltrimethyl ammonium chloride chitosan nanofibers was investigated. The fabricated nanofiber films were characterized by scanning electron microscopy, thermal gravimetric analysis, Fourier transform infrared spectroscopy, and contact angle meter analysis. The prepared nanofibers have a well-defined diameter of about 200 nm and a smooth shape. They have good antibacterial properties against Staphylococcus aureus and Escherichia coli in vitro. Tea tree oil-loaded chitosan-based nanofibers were found to be effective in delaying spoilage and extending the shelf life of salmon by sensory evaluation, texture analysis, color, total viable counts, thiobarbituric acid, and total volatile basic nitrogen during storage in the freshness experiments, thus indicating their health benefits in bioactive packaging.

A cost-effective alkaline polysulfide-air redox flow battery enabled by a dual-membrane cell architecture.

With the rapid development of renewable energy harvesting technologies, there is a significant demand for long-duration energy storage technologies that can be deployed at grid scale. In this regard, polysulfide-air redox flow batteries demonstrated great potential. However, the crossover of polysulfide is one significant challenge. Here, we report a stable and cost-effective alkaline-based hybrid polysulfide-air redox flow battery where a dual-membrane-structured flow cell design mitigates the sulfur crossover issue. Moreover, combining manganese/carbon catalysed air electrodes with sulfidised Ni foam polysulfide electrodes, the redox flow battery achieves a maximum power density of 5.8 mW cm-2 at 50% state of charge and 55 °C. An average round-trip energy efficiency of 40% is also achieved over 80 cycles at 1 mA cm-2. Based on the performance reported, techno-economic analyses suggested that energy and power costs of about 2.5 US$/kWh and 1600 US$/kW, respectively, has be achieved for this type of alkaline polysulfide-air redox flow battery, with significant scope for further reduction.

Hybrid Redox Flow Cells with Enhanced Electrochemical Performance via Binderless and Electrophoretically Deposited Nitrogen-Doped Graphene on Carbon Paper Electrodes.

Hybrid redox flow cells (HRFC) are key enablers for the development of reliable large-scale energy storage systems; however, their high cost, limited cycle performance, and incompatibilities associated with the commonly used carbon-based electrodes undermine HRFC's commercial viability. While this is often linked to lack of suitable electrocatalytic materials capable of coping with HRFC electrode processes, the combinatory use of nanocarbon additives and carbon paper electrodes holds new promise. Here, by coupling electrophoretically deposited nitrogen-doped graphene (N-G) with carbon electrodes, their surprisingly beneficial effects on three types of HRFCs, namely, hydrogen/vanadium (RHVFC), hydrogen/manganese (RHMnFC), and polysulfide/air (S-Air), are revealed. RHVFCs offer efficiencies over 70% at a current density of 150 mA cm-2 and an energy density of 45 Wh L-1 at 50 mA cm-2, while RHMnFCs achieve a 30% increase in energy efficiency (at 100 mA cm-2). The S-Air cell records an exchange current density of 4.4 × 10-2 mA cm-2, a 3-fold improvement of kinetics compared to the bare carbon paper electrode. We also present cost of storage at system level compared to the standard all-vanadium redox flow batteries. These figures-of-merit can incentivize the design, optimization, and adoption of high-performance HRFCs for successful grid-scale or renewable energy storage market penetration.

Multi-metal 4D printing with a desktop electrochemical 3D printer.

4D printing has the potential to create complex 3D geometries which are able to react to environmental stimuli opening new design possibilities. However, the vast majority of 4D printing approaches use polymer based materials, which limits the operational temperature. Here, we present a novel multi-metal electrochemical 3D printer which is able to fabricate bimetallic geometries and through the selective deposition of different metals, temperature responsive behaviour can thus be programmed into the printed structure. The concept is demonstrated through a meniscus confined electrochemical 3D printing approach with a multi-print head design with nickel and copper used as exemplar systems but this is transferable to other deposition solutions. Improvements in deposition speed (34% (Cu)-85% (Ni)) are demonstrated with an electrospun nanofibre nib compared to a sponge based approach as the medium for providing hydrostatic back pressure to balance surface tension in order to form a electrolyte meniscus stable. Scanning electron microscopy, X-ray computed tomography and energy dispersive X-ray spectroscopy shows that bimetallic structures with a tightly bound interface can be created, however convex cross sections are created due to uneven current density. Analysis of the thermo-mechanical properties of the printed strips shows that mechanical deformations can be generated in Cu-Ni strips at temperatures up to 300 °C which is due to the thermal expansion coefficient mismatch generating internal stresses in the printed structures. Electrical conductivity measurements show that the bimetallic structures have a conductivity between those of nanocrystalline copper (5.41 × 106 S.m-1) and nickel (8.2 × 105 S.m-1). The potential of this novel low-cost multi-metal 3D printing approach is demonstrated with the thermal actuation of an electrical circuit and a range of self-assembling structures.